


๐ง UPVC Socket / Equal Coupling – ็ฝๆขณๅ
UPVC Socket is a straight coupling designed to connect two compatible UPVC pipes of the same nominal size.
Also known as an Equal Socket / Straight Coupling, it allows two pipe sections to be joined together to extend or continue a pipeline without changing the pipe size or direction.
Available in a wide range of sizes from 32MM (1 1/4") up to 250MM (10").
โ
UPVC Socket / Equal Coupling
โ
Connects two same-size UPVC pipes
โ
Straight-line connection
โ
No reduction in pipe size
โ
No change in pipe direction
โ
White UPVC fitting
โ
Wide size range from 32MM to 250MM
โ
Suitable for installation, extension, repair & replacement work
๐น 32MM (1 1/4")
๐น 40MM (1 1/2")
๐น 50MM (2")
๐น 82MM (3")
๐น 110MM (4")
๐น 160MM (6")
๐น 200MM (8")
๐น 250MM (10")
• Compatible UPVC piping systems
• Straight pipe connections
• Extending existing pipe runs
• Drainage piping where compatible
• Waste pipe installations
• Residential & commercial piping
• Construction & renovation projects
• Pipe repair & replacement work
The UPVC Socket connects two compatible pipes of the same nominal size.
For example:
110MM UPVC Pipe → 110MM Socket → 110MM UPVC Pipe
or
200MM UPVC Pipe → 200MM Socket → 200MM UPVC Pipe
The pipeline continues straight without changing its nominal size.
UPVC Equal Socket / Socket
→ Same nominal size on both sides
→ Example: 110MM → 110MM
→ Used to extend a straight pipe run
UPVC Reducing Socket
→ Different nominal sizes on each side
→ Example: 110MM → 82MM
→ Used to reduce the pipeline to a smaller size
UPVC Socket
→ Standard equal coupling
→ Used to connect two same-size pipes during normal pipe installation or extension
UPVC Pipe Sleeve
→ Sleeve-type connector
→ Commonly used where a sleeve configuration is required for repair, modification or replacement work
Select according to the actual installation arrangement.
32MM = 1 1/4"
40MM = 1 1/2"
50MM = 2"
82MM = 3"
110MM = 4"
160MM = 6"
200MM = 8"
250MM = 10"
MM-to-inch references above follow the supplied product information.
โ ๏ธ Important: Please select the same nominal Socket size as the compatible UPVC pipes being connected.
โ ๏ธ Pressure rating, pipe class, wall thickness, exact socket dimensions and applicable UPVC standard were not specified in the supplied product information. Please verify these specifications where required by the installation or project.
๐ Note: Product appearance, dimensions, white colour tone, surface finish and markings may vary slightly depending on production batch.
๐ง UPVC Socket / Equal Coupling – ็ฝๆขณๅ
UPVC Socket is a straight coupling designed to connect two compatible UPVC pipes of the same nominal size.
Also known as an Equal Socket / Straight Coupling, it allows two pipe sections to be joined together to extend or continue a pipeline without changing the pipe size or direction.
Available in a wide range of sizes from 32MM (1 1/4") up to 250MM (10").
โ
UPVC Socket / Equal Coupling
โ
Connects two same-size UPVC pipes
โ
Straight-line connection
โ
No reduction in pipe size
โ
No change in pipe direction
โ
White UPVC fitting
โ
Wide size range from 32MM to 250MM
โ
Suitable for installation, extension, repair & replacement work
๐น 32MM (1 1/4")
๐น 40MM (1 1/2")
๐น 50MM (2")
๐น 82MM (3")
๐น 110MM (4")
๐น 160MM (6")
๐น 200MM (8")
๐น 250MM (10")
• Compatible UPVC piping systems
• Straight pipe connections
• Extending existing pipe runs
• Drainage piping where compatible
• Waste pipe installations
• Residential & commercial piping
• Construction & renovation projects
• Pipe repair & replacement work
The UPVC Socket connects two compatible pipes of the same nominal size.
For example:
110MM UPVC Pipe → 110MM Socket → 110MM UPVC Pipe
or
200MM UPVC Pipe → 200MM Socket → 200MM UPVC Pipe
The pipeline continues straight without changing its nominal size.
UPVC Equal Socket / Socket
→ Same nominal size on both sides
→ Example: 110MM → 110MM
→ Used to extend a straight pipe run
UPVC Reducing Socket
→ Different nominal sizes on each side
→ Example: 110MM → 82MM
→ Used to reduce the pipeline to a smaller size
UPVC Socket
→ Standard equal coupling
→ Used to connect two same-size pipes during normal pipe installation or extension
UPVC Pipe Sleeve
→ Sleeve-type connector
→ Commonly used where a sleeve configuration is required for repair, modification or replacement work
Select according to the actual installation arrangement.
32MM = 1 1/4"
40MM = 1 1/2"
50MM = 2"
82MM = 3"
110MM = 4"
160MM = 6"
200MM = 8"
250MM = 10"
MM-to-inch references above follow the supplied product information.
โ ๏ธ Important: Please select the same nominal Socket size as the compatible UPVC pipes being connected.
โ ๏ธ Pressure rating, pipe class, wall thickness, exact socket dimensions and applicable UPVC standard were not specified in the supplied product information. Please verify these specifications where required by the installation or project.
๐ Note: Product appearance, dimensions, white colour tone, surface finish and markings may vary slightly depending on production batch.