


🚰 UPVC P-Trap I/O – 白 ‘P’ 的立 I/O
UPVC P-Trap I/O is a drainage trap designed for use in compatible UPVC drainage piping systems, combining the water-seal function of a P-Trap with an Inspection Opening (I/O) for easier maintenance access.
The P-shaped configuration retains a small amount of water to create a water seal, helping reduce unpleasant drain odours and sewer gases from travelling back through the drainage system.
The built-in I/O (Inspection Opening) provides convenient access for inspection, cleaning and maintenance when required.
✅ UPVC P-Trap with I/O
✅ Built-in Inspection Opening
✅ P-shaped drainage trap configuration
✅ Creates a water seal
✅ Helps reduce drain odours & sewer gas backflow
✅ White UPVC fitting
✅ Easier access for inspection & cleaning
✅ Available in 56MM & 110MM
🔹 56MM (2") – P-Trap I/O
🔹 110MM (4") – P-Trap I/O
• Compatible UPVC drainage systems
• Wastewater drainage piping
• Building drainage installations
• Residential drainage
• Commercial building drainage
• Drainage layouts requiring inspection access
• Construction & renovation projects
• Drainage maintenance & replacement work
The curved section of the P-Trap retains a small amount of water after wastewater passes through.
This creates a water barrier:
Drainage Point → P-Trap 💧 → Drainage Pipe
The retained water helps prevent unwanted odours and sewer gases from travelling backward through the drainage system.
I/O = Inspection Opening
The inspection opening provides access to the internal section of the trap for:
• Inspection
• Cleaning
• Maintenance
• Access in case of blockage
Where future maintenance is required, the I/O should remain accessible after installation.
UPVC P-Trap I/O
→ Creates a water seal
→ Includes Inspection Opening
→ Easier access for cleaning & maintenance
UPVC P-Trap PLAIN
→ Creates a water seal
→ No I/O specified
→ Simpler plain trap configuration
56MM = 2"
110MM = 4"
The MM-to-inch references above follow the supplied product information.
⚠️ Important: Please note that this product data specifically identifies 56MM as 2". Select according to the actual compatible pipe/fitting system rather than assuming the MM size based on another product series.
⚠️ Water-seal depth, exact inspection opening design, pipe class, wall thickness, pressure rating and applicable UPVC standard were not specified in the supplied product information.
📌 Note: Product appearance, dimensions, inspection opening design, white colour tone, surface finish and markings may vary slightly depending on production batch.
🚰 UPVC P-Trap I/O – 白 ‘P’ 的立 I/O
UPVC P-Trap I/O is a drainage trap designed for use in compatible UPVC drainage piping systems, combining the water-seal function of a P-Trap with an Inspection Opening (I/O) for easier maintenance access.
The P-shaped configuration retains a small amount of water to create a water seal, helping reduce unpleasant drain odours and sewer gases from travelling back through the drainage system.
The built-in I/O (Inspection Opening) provides convenient access for inspection, cleaning and maintenance when required.
✅ UPVC P-Trap with I/O
✅ Built-in Inspection Opening
✅ P-shaped drainage trap configuration
✅ Creates a water seal
✅ Helps reduce drain odours & sewer gas backflow
✅ White UPVC fitting
✅ Easier access for inspection & cleaning
✅ Available in 56MM & 110MM
🔹 56MM (2") – P-Trap I/O
🔹 110MM (4") – P-Trap I/O
• Compatible UPVC drainage systems
• Wastewater drainage piping
• Building drainage installations
• Residential drainage
• Commercial building drainage
• Drainage layouts requiring inspection access
• Construction & renovation projects
• Drainage maintenance & replacement work
The curved section of the P-Trap retains a small amount of water after wastewater passes through.
This creates a water barrier:
Drainage Point → P-Trap 💧 → Drainage Pipe
The retained water helps prevent unwanted odours and sewer gases from travelling backward through the drainage system.
I/O = Inspection Opening
The inspection opening provides access to the internal section of the trap for:
• Inspection
• Cleaning
• Maintenance
• Access in case of blockage
Where future maintenance is required, the I/O should remain accessible after installation.
UPVC P-Trap I/O
→ Creates a water seal
→ Includes Inspection Opening
→ Easier access for cleaning & maintenance
UPVC P-Trap PLAIN
→ Creates a water seal
→ No I/O specified
→ Simpler plain trap configuration
56MM = 2"
110MM = 4"
The MM-to-inch references above follow the supplied product information.
⚠️ Important: Please note that this product data specifically identifies 56MM as 2". Select according to the actual compatible pipe/fitting system rather than assuming the MM size based on another product series.
⚠️ Water-seal depth, exact inspection opening design, pipe class, wall thickness, pressure rating and applicable UPVC standard were not specified in the supplied product information.
📌 Note: Product appearance, dimensions, inspection opening design, white colour tone, surface finish and markings may vary slightly depending on production batch.