


🔧 UPVC Equal Single Branch / Tee – 白三叉
UPVC Single Branch / Tee is designed to create one branch connection from a compatible UPVC main pipeline.
As an equal-size branch fitting, the main pipeline continues through the fitting while an additional branch is created using the same nominal size.
It is suitable for piping layouts that require a three-way connection without reducing the branch size.
Available in a wide range of sizes from 32MM (1 1/4") up to 200MM (8").
✅ UPVC Single Branch / Tee
✅ Equal-size branch configuration
✅ Creates one branch connection
✅ Main line & branch use the same nominal size
✅ White UPVC fitting
✅ Three-way piping connection
✅ Wide size range from 32MM to 200MM
✅ Suitable for compatible UPVC piping systems
🔹 32MM (1 1/4")
🔹 40MM (1 1/2")
🔹 50MM (2")
🔹 82MM (3")
🔹 110MM (4")
🔹 160MM (6")
🔹 200MM (8")
• Compatible UPVC piping systems
• Single branch pipe connections
• Drainage piping where compatible
• Waste pipe installations
• Residential & commercial piping
• Building drainage layouts
• Construction & renovation projects
• Pipe extension & modification work
The UPVC Single Branch / Tee provides three connection points:
Branch
↑
Main Pipe → Tee → Main Pipe
For an equal-size configuration, all three connections use the same nominal size.
For example:
110MM Main → 110MM Tee → 110MM Main
↳ 110MM Branch
UPVC Equal Single Branch / Tee
→ Main line and branch use the same nominal size
→ Example: 110MM Main + 110MM Branch
UPVC Reducing Tee
→ Main line uses a larger nominal size
→ Branch uses a smaller nominal size
→ Example: 110MM Main + 56MM Branch
Single Branch / Tee
→ 3 connection openings
→ Main line + one branch
Cross Tee
→ 4 connection openings
→ Main line + two branch directions
32MM = 1 1/4"
40MM = 1 1/2"
50MM = 2"
82MM = 3"
110MM = 4"
160MM = 6"
200MM = 8"
MM-to-inch references above follow the supplied product information.
⚠️ Important: The supplied product information does not specify the exact branch angle. Please verify the fitting configuration where a specific branch angle is required.
⚠️ Pressure rating, pipe class, wall thickness, exact dimensions and applicable UPVC standard were not specified in the supplied product information.
📌 Note: Product appearance, dimensions, white colour tone, surface finish and markings may vary slightly depending on production batch.
🔧 UPVC Equal Single Branch / Tee – 白三叉
UPVC Single Branch / Tee is designed to create one branch connection from a compatible UPVC main pipeline.
As an equal-size branch fitting, the main pipeline continues through the fitting while an additional branch is created using the same nominal size.
It is suitable for piping layouts that require a three-way connection without reducing the branch size.
Available in a wide range of sizes from 32MM (1 1/4") up to 200MM (8").
✅ UPVC Single Branch / Tee
✅ Equal-size branch configuration
✅ Creates one branch connection
✅ Main line & branch use the same nominal size
✅ White UPVC fitting
✅ Three-way piping connection
✅ Wide size range from 32MM to 200MM
✅ Suitable for compatible UPVC piping systems
🔹 32MM (1 1/4")
🔹 40MM (1 1/2")
🔹 50MM (2")
🔹 82MM (3")
🔹 110MM (4")
🔹 160MM (6")
🔹 200MM (8")
• Compatible UPVC piping systems
• Single branch pipe connections
• Drainage piping where compatible
• Waste pipe installations
• Residential & commercial piping
• Building drainage layouts
• Construction & renovation projects
• Pipe extension & modification work
The UPVC Single Branch / Tee provides three connection points:
Branch
↑
Main Pipe → Tee → Main Pipe
For an equal-size configuration, all three connections use the same nominal size.
For example:
110MM Main → 110MM Tee → 110MM Main
↳ 110MM Branch
UPVC Equal Single Branch / Tee
→ Main line and branch use the same nominal size
→ Example: 110MM Main + 110MM Branch
UPVC Reducing Tee
→ Main line uses a larger nominal size
→ Branch uses a smaller nominal size
→ Example: 110MM Main + 56MM Branch
Single Branch / Tee
→ 3 connection openings
→ Main line + one branch
Cross Tee
→ 4 connection openings
→ Main line + two branch directions
32MM = 1 1/4"
40MM = 1 1/2"
50MM = 2"
82MM = 3"
110MM = 4"
160MM = 6"
200MM = 8"
MM-to-inch references above follow the supplied product information.
⚠️ Important: The supplied product information does not specify the exact branch angle. Please verify the fitting configuration where a specific branch angle is required.
⚠️ Pressure rating, pipe class, wall thickness, exact dimensions and applicable UPVC standard were not specified in the supplied product information.
📌 Note: Product appearance, dimensions, white colour tone, surface finish and markings may vary slightly depending on production batch.