


🔧 UPVC Boss Connector / Branch Connector – 白喉身接头
UPVC Boss Connector is designed to provide a smaller branch connection from a larger compatible UPVC main pipe.
It is useful for piping layouts where an additional branch needs to be connected from the main pipe while transitioning to a smaller nominal pipe size.
Available in multiple main-to-branch size combinations from 82MM × 50MM (3" × 2") up to 160MM × 110MM (6" × 4").
✅ UPVC Boss / Branch Connector
✅ Creates a smaller branch connection from a larger main pipe
✅ Multiple reducing size combinations available
✅ White UPVC fitting
✅ Suitable for compatible UPVC piping systems
✅ Useful for branch pipe installation
✅ Suitable for new installation, modification & replacement work
🔹 82MM × 50MM (3" × 2")
Main: 82MM (3") → Branch: 50MM (2")
🔹 110MM × 50MM (4" × 2")
Main: 110MM (4") → Branch: 50MM (2")
🔹 110MM × 82MM (4" × 3")
Main: 110MM (4") → Branch: 82MM (3")
🔹 160MM × 82MM (6" × 3")
Main: 160MM (6") → Branch: 82MM (3")
🔹 160MM × 110MM (6" × 4")
Main: 160MM (6") → Branch: 110MM (4")
• Compatible UPVC piping systems
• Drainage piping where compatible
• Branch pipe connections
• Waste pipe installations
• Residential & commercial piping
• Construction & renovation projects
• Existing piping modifications
• Pipe extension & replacement work
For this product:
First Size = Main Pipe Size
Second Size = Branch Connection Size
For example:
110MM × 50MM (4" × 2")
means:
110MM (4") Main Pipe → 50MM (2") Branch Connection
This allows a smaller pipe branch to be connected from a larger main pipeline.
UPVC Boss Connector
→ Used to create a branch connection from the main pipe body / main pipe run
→ Useful where a smaller branch needs to be introduced into the piping layout
UPVC Reducing Tee
→ A complete three-way fitting installed directly as part of the pipeline
→ Main pipe enters and exits through the tee
→ Smaller branch is built into the complete tee fitting
The correct fitting depends on the piping layout and installation method.
50MM = 2"
82MM = 3"
110MM = 4"
160MM = 6"
MM-to-inch references above follow the supplied product information.
⚠️ Important: Please confirm both the main pipe size and required branch size before ordering.
⚠️ The supplied product information does not specify the exact installation method, branch angle, pressure rating, pipe class, wall thickness or applicable UPVC standard. Please verify compatibility and installation requirements before use.
📌 Note: Product appearance, dimensions, white colour tone, surface finish and markings may vary slightly depending on production batch.
🔧 UPVC Boss Connector / Branch Connector – 白喉身接头
UPVC Boss Connector is designed to provide a smaller branch connection from a larger compatible UPVC main pipe.
It is useful for piping layouts where an additional branch needs to be connected from the main pipe while transitioning to a smaller nominal pipe size.
Available in multiple main-to-branch size combinations from 82MM × 50MM (3" × 2") up to 160MM × 110MM (6" × 4").
✅ UPVC Boss / Branch Connector
✅ Creates a smaller branch connection from a larger main pipe
✅ Multiple reducing size combinations available
✅ White UPVC fitting
✅ Suitable for compatible UPVC piping systems
✅ Useful for branch pipe installation
✅ Suitable for new installation, modification & replacement work
🔹 82MM × 50MM (3" × 2")
Main: 82MM (3") → Branch: 50MM (2")
🔹 110MM × 50MM (4" × 2")
Main: 110MM (4") → Branch: 50MM (2")
🔹 110MM × 82MM (4" × 3")
Main: 110MM (4") → Branch: 82MM (3")
🔹 160MM × 82MM (6" × 3")
Main: 160MM (6") → Branch: 82MM (3")
🔹 160MM × 110MM (6" × 4")
Main: 160MM (6") → Branch: 110MM (4")
• Compatible UPVC piping systems
• Drainage piping where compatible
• Branch pipe connections
• Waste pipe installations
• Residential & commercial piping
• Construction & renovation projects
• Existing piping modifications
• Pipe extension & replacement work
For this product:
First Size = Main Pipe Size
Second Size = Branch Connection Size
For example:
110MM × 50MM (4" × 2")
means:
110MM (4") Main Pipe → 50MM (2") Branch Connection
This allows a smaller pipe branch to be connected from a larger main pipeline.
UPVC Boss Connector
→ Used to create a branch connection from the main pipe body / main pipe run
→ Useful where a smaller branch needs to be introduced into the piping layout
UPVC Reducing Tee
→ A complete three-way fitting installed directly as part of the pipeline
→ Main pipe enters and exits through the tee
→ Smaller branch is built into the complete tee fitting
The correct fitting depends on the piping layout and installation method.
50MM = 2"
82MM = 3"
110MM = 4"
160MM = 6"
MM-to-inch references above follow the supplied product information.
⚠️ Important: Please confirm both the main pipe size and required branch size before ordering.
⚠️ The supplied product information does not specify the exact installation method, branch angle, pressure rating, pipe class, wall thickness or applicable UPVC standard. Please verify compatibility and installation requirements before use.
📌 Note: Product appearance, dimensions, white colour tone, surface finish and markings may vary slightly depending on production batch.