


🔧 UPVC 92° Sweep Bend I/O – 92度(有门)白曲争
UPVC 92° Sweep Bend I/O is designed to provide a 92-degree directional change in a compatible UPVC piping system while incorporating an inspection opening (I/O) for easier access to the pipeline.
The sweep bend configuration provides a more gradual curved transition, while the inspection opening allows access for inspection, cleaning and maintenance when required.
Available in sizes from 40MM (1 1/2") up to 110MM (4").
✅ 92° Sweep Bend configuration
✅ I/O – Inspection Opening
✅ “有门” access point for maintenance
✅ White UPVC fitting
✅ Provides a sweeping directional change
✅ Allows easier access for inspection & cleaning
✅ Suitable for compatible UPVC piping systems
✅ Available from 40MM to 110MM
🔹 40MM (1 1/2")
🔹 50MM (2")
🔹 82MM (3")
🔹 110MM (4")
• Compatible UPVC piping systems
• Drainage piping where compatible
• Waste pipe installations
• Pipe layouts requiring inspection access
• Residential drainage
• Commercial building drainage
• Construction & renovation projects
• Maintenance-friendly piping layouts
I/O = Inspection Opening
The fitting includes an accessible opening or “door” — commonly referred to as 有门 — which provides access to the internal pipe passage.
This can be useful for:
• Pipeline inspection
• Cleaning
• Maintenance
• Accessing the pipe in case of blockage
UPVC Pipe → 92° Sweep Bend I/O ↳ UPVC Pipe
↳ Inspection Access
This combines a directional bend and an inspection access point in one fitting.
92° Sweep Bend I/O
→ 92° directional change
→ Sweeping / curved bend configuration
→ Includes an inspection opening
→ Easier access for cleaning & maintenance
Standard Bend
→ Primarily changes pipe direction
→ Does not necessarily include an inspection opening
40MM = 1 1/2"
50MM = 2"
82MM = 3"
110MM = 4"
MM-to-inch references above follow the supplied product information.
⚠️ Important: This product is specifically supplied as a 92° Sweep Bend I/O. Please do not assume it is the same as a standard 90° bend.
⚠️ Please ensure the inspection opening remains accessible after installation where future inspection or maintenance is required.
⚠️ Pressure rating, pipe class, wall thickness, exact bend radius and applicable UPVC standard were not specified in the supplied product information.
📌 Note: Product appearance, dimensions, inspection opening design, white colour tone, surface finish and markings may vary slightly depending on production batch.
🔧 UPVC 92° Sweep Bend I/O – 92度(有门)白曲争
UPVC 92° Sweep Bend I/O is designed to provide a 92-degree directional change in a compatible UPVC piping system while incorporating an inspection opening (I/O) for easier access to the pipeline.
The sweep bend configuration provides a more gradual curved transition, while the inspection opening allows access for inspection, cleaning and maintenance when required.
Available in sizes from 40MM (1 1/2") up to 110MM (4").
✅ 92° Sweep Bend configuration
✅ I/O – Inspection Opening
✅ “有门” access point for maintenance
✅ White UPVC fitting
✅ Provides a sweeping directional change
✅ Allows easier access for inspection & cleaning
✅ Suitable for compatible UPVC piping systems
✅ Available from 40MM to 110MM
🔹 40MM (1 1/2")
🔹 50MM (2")
🔹 82MM (3")
🔹 110MM (4")
• Compatible UPVC piping systems
• Drainage piping where compatible
• Waste pipe installations
• Pipe layouts requiring inspection access
• Residential drainage
• Commercial building drainage
• Construction & renovation projects
• Maintenance-friendly piping layouts
I/O = Inspection Opening
The fitting includes an accessible opening or “door” — commonly referred to as 有门 — which provides access to the internal pipe passage.
This can be useful for:
• Pipeline inspection
• Cleaning
• Maintenance
• Accessing the pipe in case of blockage
UPVC Pipe → 92° Sweep Bend I/O ↳ UPVC Pipe
↳ Inspection Access
This combines a directional bend and an inspection access point in one fitting.
92° Sweep Bend I/O
→ 92° directional change
→ Sweeping / curved bend configuration
→ Includes an inspection opening
→ Easier access for cleaning & maintenance
Standard Bend
→ Primarily changes pipe direction
→ Does not necessarily include an inspection opening
40MM = 1 1/2"
50MM = 2"
82MM = 3"
110MM = 4"
MM-to-inch references above follow the supplied product information.
⚠️ Important: This product is specifically supplied as a 92° Sweep Bend I/O. Please do not assume it is the same as a standard 90° bend.
⚠️ Please ensure the inspection opening remains accessible after installation where future inspection or maintenance is required.
⚠️ Pressure rating, pipe class, wall thickness, exact bend radius and applicable UPVC standard were not specified in the supplied product information.
📌 Note: Product appearance, dimensions, inspection opening design, white colour tone, surface finish and markings may vary slightly depending on production batch.