


🔧 UPVC 45° Bend / 45 Degree Elbow – 45度白曲争
UPVC 45° Bend is designed to change the direction of a compatible UPVC pipeline by 45 degrees.
The 45° configuration provides a more gradual directional change compared with a sharper bend, making it suitable for piping layouts where the pipe route needs to turn while maintaining a smoother transition.
Available in a wide range of sizes from 32MM (1 1/4") up to 200MM (8").
✅ UPVC 45° Bend / Elbow
✅ 45-degree directional change
✅ White UPVC fitting
✅ Suitable for compatible UPVC piping systems
✅ Provides a more gradual turn compared with a sharper bend
✅ Wide size range from 32MM to 200MM
✅ Suitable for installation, extension, repair & replacement work
🔹 32MM (1 1/4")
🔹 40MM (1 1/2")
🔹 50MM (2")
🔹 82MM (3")
🔹 110MM (4")
🔹 160MM (6")
🔹 200MM (8")
• Compatible UPVC piping systems
• Drainage piping where compatible
• Waste pipe installations
• Direction-changing pipe layouts
• Residential piping
• Commercial building piping
• Construction & renovation projects
• Pipe extension & replacement work
The UPVC 45° Bend allows the pipeline to make a 45-degree directional change.
UPVC Pipe → 45° Bend ↗ UPVC Pipe
This makes it useful where the piping route needs to change direction without making a sharp turn.
32MM = 1 1/4"
40MM = 1 1/2"
50MM = 2"
82MM = 3"
110MM = 4"
160MM = 6"
200MM = 8"
MM-to-inch references above follow the supplied product information.
UPVC 45° Bend
→ Changes pipe direction by 45°
→ Provides a more gradual directional transition
UPVC 90° Bend
→ Changes pipe direction by 90°
→ Used where a sharper right-angle turn is required
Choose the bend angle according to the required piping layout.
⚠️ Important: Please select the correct nominal size according to the compatible UPVC pipe being installed.
⚠️ Pressure rating, pipe class, wall thickness, applicable standard and exact overall dimensions were not specified in the supplied product information. Please verify these specifications where required by the installation or project.
📌 Note: Product appearance, dimensions, white colour tone, surface finish and markings may vary slightly depending on production batch.
🔧 UPVC 45° Bend / 45 Degree Elbow – 45度白曲争
UPVC 45° Bend is designed to change the direction of a compatible UPVC pipeline by 45 degrees.
The 45° configuration provides a more gradual directional change compared with a sharper bend, making it suitable for piping layouts where the pipe route needs to turn while maintaining a smoother transition.
Available in a wide range of sizes from 32MM (1 1/4") up to 200MM (8").
✅ UPVC 45° Bend / Elbow
✅ 45-degree directional change
✅ White UPVC fitting
✅ Suitable for compatible UPVC piping systems
✅ Provides a more gradual turn compared with a sharper bend
✅ Wide size range from 32MM to 200MM
✅ Suitable for installation, extension, repair & replacement work
🔹 32MM (1 1/4")
🔹 40MM (1 1/2")
🔹 50MM (2")
🔹 82MM (3")
🔹 110MM (4")
🔹 160MM (6")
🔹 200MM (8")
• Compatible UPVC piping systems
• Drainage piping where compatible
• Waste pipe installations
• Direction-changing pipe layouts
• Residential piping
• Commercial building piping
• Construction & renovation projects
• Pipe extension & replacement work
The UPVC 45° Bend allows the pipeline to make a 45-degree directional change.
UPVC Pipe → 45° Bend ↗ UPVC Pipe
This makes it useful where the piping route needs to change direction without making a sharp turn.
32MM = 1 1/4"
40MM = 1 1/2"
50MM = 2"
82MM = 3"
110MM = 4"
160MM = 6"
200MM = 8"
MM-to-inch references above follow the supplied product information.
UPVC 45° Bend
→ Changes pipe direction by 45°
→ Provides a more gradual directional transition
UPVC 90° Bend
→ Changes pipe direction by 90°
→ Used where a sharper right-angle turn is required
Choose the bend angle according to the required piping layout.
⚠️ Important: Please select the correct nominal size according to the compatible UPVC pipe being installed.
⚠️ Pressure rating, pipe class, wall thickness, applicable standard and exact overall dimensions were not specified in the supplied product information. Please verify these specifications where required by the installation or project.
📌 Note: Product appearance, dimensions, white colour tone, surface finish and markings may vary slightly depending on production batch.