


🔧 Stainless Steel Reducing Tee / S/S Reducer Tee – 白钢大小三叉
S/S Reducing Tee is a stainless steel threaded pipe fitting designed to create a smaller branch connection from a larger main pipeline.
The main line continues through the Tee at the larger nominal size, while the branch outlet uses the smaller nominal size. This allows the piping system to branch and reduce the connection size within a single fitting.
Available in multiple size combinations from 3/8" × 1/4" up to 1" × 3/4".
✅ Stainless Steel (S/S) Reducing Tee
✅ Female threaded connection configuration
✅ Creates a smaller branch from the main pipeline
✅ Combines branching + size reduction
✅ Main line remains at the larger nominal size
✅ Multiple reducing size combinations available
✅ Suitable for installation, modification & replacement work
🔹 10MM × 8MM (3/8" × 1/4")
🔹 15MM × 8MM (1/2" × 1/4")
🔹 15MM × 10MM (1/2" × 3/8")
🔹 20MM × 15MM (3/4" × 1/2")
🔹 25MM × 15MM (1" × 1/2")
🔹 25MM × 20MM (1" × 3/4")
• Compatible threaded piping systems
• Branch pipe connections
• Different-size piping connections
• Plumbing installations
• Water piping applications where compatible
• Residential & commercial piping
• Building & renovation projects
• Repair & modification work
For this Reducing Tee:
First Size = Main Line Size
Second Size = Reduced Branch Size
Example:
25MM Main ↔ Reducing Tee ↔ 25MM Main
↳ 15MM Branch
For the 25MM × 15MM (1" × 1/2") variation:
1" Main → 1" Main + 1/2" Branch
10MM × 8MM
3/8" Main + 1/4" Branch
15MM × 8MM
1/2" Main + 1/4" Branch
15MM × 10MM
1/2" Main + 3/8" Branch
20MM × 15MM
3/4" Main + 1/2" Branch
25MM × 15MM
1" Main + 1/2" Branch
25MM × 20MM
1" Main + 3/4" Branch
MM-to-inch references above follow the supplied product information.
S/S Equal Tee
→ All three connections use the same nominal size
Example:
1" Main → 1" Main + 1" Branch
S/S Reducing Tee
→ Main line uses the larger nominal size
→ Branch uses a smaller nominal size
Example:
1" Main → 1" Main + 1/2" Branch
⚠️ Important: Please check both the main-line size and branch size before ordering. For example, 1" × 1/2" and 1" × 3/4" have the same main size but different branch sizes.
⚠️ Stainless steel grade (such as SS304 / SS316), thread standard, pressure rating and exact overall dimensions were not specified in the supplied product information. Please verify these specifications where required for your installation or project.
📌 Note: Product appearance, dimensions, surface finish and markings may vary slightly depending on production batch.
🔧 Stainless Steel Reducing Tee / S/S Reducer Tee – 白钢大小三叉
S/S Reducing Tee is a stainless steel threaded pipe fitting designed to create a smaller branch connection from a larger main pipeline.
The main line continues through the Tee at the larger nominal size, while the branch outlet uses the smaller nominal size. This allows the piping system to branch and reduce the connection size within a single fitting.
Available in multiple size combinations from 3/8" × 1/4" up to 1" × 3/4".
✅ Stainless Steel (S/S) Reducing Tee
✅ Female threaded connection configuration
✅ Creates a smaller branch from the main pipeline
✅ Combines branching + size reduction
✅ Main line remains at the larger nominal size
✅ Multiple reducing size combinations available
✅ Suitable for installation, modification & replacement work
🔹 10MM × 8MM (3/8" × 1/4")
🔹 15MM × 8MM (1/2" × 1/4")
🔹 15MM × 10MM (1/2" × 3/8")
🔹 20MM × 15MM (3/4" × 1/2")
🔹 25MM × 15MM (1" × 1/2")
🔹 25MM × 20MM (1" × 3/4")
• Compatible threaded piping systems
• Branch pipe connections
• Different-size piping connections
• Plumbing installations
• Water piping applications where compatible
• Residential & commercial piping
• Building & renovation projects
• Repair & modification work
For this Reducing Tee:
First Size = Main Line Size
Second Size = Reduced Branch Size
Example:
25MM Main ↔ Reducing Tee ↔ 25MM Main
↳ 15MM Branch
For the 25MM × 15MM (1" × 1/2") variation:
1" Main → 1" Main + 1/2" Branch
10MM × 8MM
3/8" Main + 1/4" Branch
15MM × 8MM
1/2" Main + 1/4" Branch
15MM × 10MM
1/2" Main + 3/8" Branch
20MM × 15MM
3/4" Main + 1/2" Branch
25MM × 15MM
1" Main + 1/2" Branch
25MM × 20MM
1" Main + 3/4" Branch
MM-to-inch references above follow the supplied product information.
S/S Equal Tee
→ All three connections use the same nominal size
Example:
1" Main → 1" Main + 1" Branch
S/S Reducing Tee
→ Main line uses the larger nominal size
→ Branch uses a smaller nominal size
Example:
1" Main → 1" Main + 1/2" Branch
⚠️ Important: Please check both the main-line size and branch size before ordering. For example, 1" × 1/2" and 1" × 3/4" have the same main size but different branch sizes.
⚠️ Stainless steel grade (such as SS304 / SS316), thread standard, pressure rating and exact overall dimensions were not specified in the supplied product information. Please verify these specifications where required for your installation or project.
📌 Note: Product appearance, dimensions, surface finish and markings may vary slightly depending on production batch.