


🔧 Stainless Steel Reducing Elbow / S/S Reducer Elbow – 白钢大小曲争
S/S Reducing Elbow is a stainless steel threaded pipe fitting designed to connect two different nominal sizes while changing the direction of the pipeline.
Unlike a standard equal elbow, the two connections are different sizes, making it suitable where the piping system needs both a size transition and a directional change at the same connection point.
Available in multiple sizes from 3/8" × 1/4" up to 1" × 3/4".
✅ Stainless Steel (S/S) reducing elbow
✅ Combines size reduction + direction change
✅ Connects two different threaded sizes
✅ Compact reducer elbow configuration
✅ Suitable for compatible threaded piping systems
✅ Multiple size combinations available
✅ Suitable for installation, modification & replacement work
🔹 10MM × 8MM (3/8" × 1/4")
🔹 15MM × 8MM (1/2" × 1/4")
🔹 15MM × 10MM (1/2" × 3/8")
🔹 20MM × 15MM (3/4" × 1/2")
🔹 25MM × 15MM (1" × 1/2")
🔹 25MM × 20MM (1" × 3/4")
• Compatible threaded piping systems
• Different-size pipe connections
• Direction-changing installations
• Plumbing systems
• Valve & fitting connections where compatible
• Residential piping
• Commercial piping
• Building & renovation projects
• Repair & modification work
For this product:
First Size = Larger Connection
Second Size = Smaller Connection
Examples:
10MM → 8MM
3/8" → 1/4"
15MM → 8MM
1/2" → 1/4"
15MM → 10MM
1/2" → 3/8"
20MM → 15MM
3/4" → 1/2"
25MM → 15MM
1" → 1/2"
25MM → 20MM
1" → 3/4"
S/S Equal Elbow
→ Same nominal size on both connections
→ Used primarily to change pipe direction
Example:
1/2" → 1/2"
S/S Reducing Elbow
→ Different nominal sizes
→ Changes pipe size and direction at the same fitting
Example:
3/4" → 1/2"
S/S Reducing Elbow
→ Reduces connection size
→ Also changes pipe direction
S/S Reducing Bush
→ Reduces threaded connection size
→ Does not serve as an elbow for changing the pipeline direction
⚠️ Important: Please check both connection sizes before ordering, as each variation is designed for a specific size combination.
⚠️ Elbow angle, stainless steel grade (such as SS304 / SS316), thread standard, pressure rating and exact overall dimensions were not specified in the supplied product information. Please verify these specifications where required for your installation or project.
📌 Note: Product appearance, dimensions, surface finish and markings may vary slightly depending on production batch.
🔧 Stainless Steel Reducing Elbow / S/S Reducer Elbow – 白钢大小曲争
S/S Reducing Elbow is a stainless steel threaded pipe fitting designed to connect two different nominal sizes while changing the direction of the pipeline.
Unlike a standard equal elbow, the two connections are different sizes, making it suitable where the piping system needs both a size transition and a directional change at the same connection point.
Available in multiple sizes from 3/8" × 1/4" up to 1" × 3/4".
✅ Stainless Steel (S/S) reducing elbow
✅ Combines size reduction + direction change
✅ Connects two different threaded sizes
✅ Compact reducer elbow configuration
✅ Suitable for compatible threaded piping systems
✅ Multiple size combinations available
✅ Suitable for installation, modification & replacement work
🔹 10MM × 8MM (3/8" × 1/4")
🔹 15MM × 8MM (1/2" × 1/4")
🔹 15MM × 10MM (1/2" × 3/8")
🔹 20MM × 15MM (3/4" × 1/2")
🔹 25MM × 15MM (1" × 1/2")
🔹 25MM × 20MM (1" × 3/4")
• Compatible threaded piping systems
• Different-size pipe connections
• Direction-changing installations
• Plumbing systems
• Valve & fitting connections where compatible
• Residential piping
• Commercial piping
• Building & renovation projects
• Repair & modification work
For this product:
First Size = Larger Connection
Second Size = Smaller Connection
Examples:
10MM → 8MM
3/8" → 1/4"
15MM → 8MM
1/2" → 1/4"
15MM → 10MM
1/2" → 3/8"
20MM → 15MM
3/4" → 1/2"
25MM → 15MM
1" → 1/2"
25MM → 20MM
1" → 3/4"
S/S Equal Elbow
→ Same nominal size on both connections
→ Used primarily to change pipe direction
Example:
1/2" → 1/2"
S/S Reducing Elbow
→ Different nominal sizes
→ Changes pipe size and direction at the same fitting
Example:
3/4" → 1/2"
S/S Reducing Elbow
→ Reduces connection size
→ Also changes pipe direction
S/S Reducing Bush
→ Reduces threaded connection size
→ Does not serve as an elbow for changing the pipeline direction
⚠️ Important: Please check both connection sizes before ordering, as each variation is designed for a specific size combination.
⚠️ Elbow angle, stainless steel grade (such as SS304 / SS316), thread standard, pressure rating and exact overall dimensions were not specified in the supplied product information. Please verify these specifications where required for your installation or project.
📌 Note: Product appearance, dimensions, surface finish and markings may vary slightly depending on production batch.