


🔧 PVC End Cap – PVC 元帽
PVC End Cap is designed to close and terminate the end of a compatible PVC pipe, providing a simple way to seal off a pipe end where no further connection is required.
It can be used for permanent pipe termination or in piping layouts where a particular pipe section needs to end at a designated point.
Available in a wide size range from 15MM (1/2") up to 155MM (6").
✅ PVC pipe end cap
✅ Designed to close the end of a compatible PVC pipe
✅ Simple pipe termination fitting
✅ Wide size range available
✅ Sizes from 15MM up to 155MM
✅ Suitable for various PVC piping installations
✅ Suitable for new installations, repairs & replacement work
🔹 15MM (1/2")
🔹 20MM (3/4")
🔹 25MM (1")
🔹 32MM (1 1/4")
🔹 40MM (1 1/2")
🔹 50MM (2")
🔹 80MM (3")
🔹 100MM (4")
🔹 155MM (6") – JIS
⚠️ JIS is specifically stated for the 155MM (6") variation only.
• PVC piping systems
• Closing unused pipe ends
• Pipe termination points
• Water piping installations
• Compatible drainage piping
• Plumbing work
• Residential piping
• Commercial piping
• Building & renovation projects
• Repair & replacement work
The PVC End Cap is fitted at the end of a compatible PVC pipe where the pipeline needs to stop.
Example:
PVC Pipe → PVC End Cap ⛔
Unlike a socket, tee or elbow, the End Cap does not continue or branch the pipeline. Its purpose is to close the pipe end.
15MM = 1/2"
20MM = 3/4"
25MM = 1"
32MM = 1 1/4"
40MM = 1 1/2"
50MM = 2"
80MM = 3"
100MM = 4"
155MM = 6" (as stated in supplied product data)
⚠️ Important: Please select the End Cap according to the nominal size and compatibility of your PVC pipe before ordering.
⚠️ The supplied product information specifically identifies 155MM (6") as JIS. JIS should not be assumed for the other sizes in this listing.
⚠️ Pressure rating and exact overall dimensions were not specified in the provided product information. Where a particular pressure class, standard or project specification is required, please verify compatibility before purchase.
📌 Note: Product appearance, dimensions, surface finish and markings may vary slightly depending on production batch.
🔧 PVC End Cap – PVC 元帽
PVC End Cap is designed to close and terminate the end of a compatible PVC pipe, providing a simple way to seal off a pipe end where no further connection is required.
It can be used for permanent pipe termination or in piping layouts where a particular pipe section needs to end at a designated point.
Available in a wide size range from 15MM (1/2") up to 155MM (6").
✅ PVC pipe end cap
✅ Designed to close the end of a compatible PVC pipe
✅ Simple pipe termination fitting
✅ Wide size range available
✅ Sizes from 15MM up to 155MM
✅ Suitable for various PVC piping installations
✅ Suitable for new installations, repairs & replacement work
🔹 15MM (1/2")
🔹 20MM (3/4")
🔹 25MM (1")
🔹 32MM (1 1/4")
🔹 40MM (1 1/2")
🔹 50MM (2")
🔹 80MM (3")
🔹 100MM (4")
🔹 155MM (6") – JIS
⚠️ JIS is specifically stated for the 155MM (6") variation only.
• PVC piping systems
• Closing unused pipe ends
• Pipe termination points
• Water piping installations
• Compatible drainage piping
• Plumbing work
• Residential piping
• Commercial piping
• Building & renovation projects
• Repair & replacement work
The PVC End Cap is fitted at the end of a compatible PVC pipe where the pipeline needs to stop.
Example:
PVC Pipe → PVC End Cap ⛔
Unlike a socket, tee or elbow, the End Cap does not continue or branch the pipeline. Its purpose is to close the pipe end.
15MM = 1/2"
20MM = 3/4"
25MM = 1"
32MM = 1 1/4"
40MM = 1 1/2"
50MM = 2"
80MM = 3"
100MM = 4"
155MM = 6" (as stated in supplied product data)
⚠️ Important: Please select the End Cap according to the nominal size and compatibility of your PVC pipe before ordering.
⚠️ The supplied product information specifically identifies 155MM (6") as JIS. JIS should not be assumed for the other sizes in this listing.
⚠️ Pressure rating and exact overall dimensions were not specified in the provided product information. Where a particular pressure class, standard or project specification is required, please verify compatibility before purchase.
📌 Note: Product appearance, dimensions, surface finish and markings may vary slightly depending on production batch.