


🔧 PVC 45° Elbow ‘O’ – 45度薄庄曲争
PVC 45° Elbow ‘O’ is designed to provide a 45-degree change of direction in a compatible PVC piping system.
This product belongs to the ‘O’ / 薄庄 series and is available in larger sizes ranging from 40MM (1 1/2") up to 200MM (8").
The 45° configuration provides a more gradual direction change compared with a 90° elbow, making it suitable for piping layouts that require an angled connection.
✅ PVC 45° elbow / bend
✅ ‘O’ / 薄庄 type
✅ Provides a 45-degree direction change
✅ Same nominal size connection on both ends
✅ Wide size range from 40MM to 200MM
✅ Suitable for compatible PVC piping systems
✅ Suitable for new installation, repair & replacement work
🔹 40MM (1 1/2") – ‘O’
🔹 50MM (2") – ‘O’
🔹 80MM (3") – ‘O’
🔹 100MM (4") – ‘O’
🔹 150MM (6") – ‘O’ / JIS
🔹 200MM (8") – ‘O’ / JIS
⚠️ JIS is specifically stated for the 150MM and 200MM variations only.
• Compatible PVC piping systems
• Drainage piping where compatible
• Plumbing installations
• 45° pipe direction changes
• Residential piping
• Commercial piping
• Building & renovation projects
• New piping installations
• Repair & replacement work
PVC Pipe → 45° Elbow → PVC Pipe
The fitting changes the pipe route by approximately 45 degrees, allowing a more gradual directional change compared with a 90° elbow.
40MM = 1 1/2"
50MM = 2"
80MM = 3"
100MM = 4"
150MM = 6"
200MM = 8"
PVC Elbow ‘O’
→ 薄庄 series
PVC Elbow ‘D’
→ 厚庄 series
Please select the correct series according to the PVC piping system and fitting specification required for your installation.
⚠️ Important: Do not select based on nominal size alone. Please confirm the required ‘O’ / 薄庄 type and compatibility with your PVC pipe before ordering.
⚠️ The supplied product information specifically identifies 150MM (6") and 200MM (8") as JIS. JIS should not be assumed for the 40MM, 50MM, 80MM or 100MM variations.
⚠️ Pressure rating and exact overall dimensions were not specified in the provided product information. Where a specific pressure class, standard or project specification is required, please verify compatibility before purchase.
📌 Note: Product appearance, dimensions, surface finish and markings may vary slightly depending on production batch.
🔧 PVC 45° Elbow ‘O’ – 45度薄庄曲争
PVC 45° Elbow ‘O’ is designed to provide a 45-degree change of direction in a compatible PVC piping system.
This product belongs to the ‘O’ / 薄庄 series and is available in larger sizes ranging from 40MM (1 1/2") up to 200MM (8").
The 45° configuration provides a more gradual direction change compared with a 90° elbow, making it suitable for piping layouts that require an angled connection.
✅ PVC 45° elbow / bend
✅ ‘O’ / 薄庄 type
✅ Provides a 45-degree direction change
✅ Same nominal size connection on both ends
✅ Wide size range from 40MM to 200MM
✅ Suitable for compatible PVC piping systems
✅ Suitable for new installation, repair & replacement work
🔹 40MM (1 1/2") – ‘O’
🔹 50MM (2") – ‘O’
🔹 80MM (3") – ‘O’
🔹 100MM (4") – ‘O’
🔹 150MM (6") – ‘O’ / JIS
🔹 200MM (8") – ‘O’ / JIS
⚠️ JIS is specifically stated for the 150MM and 200MM variations only.
• Compatible PVC piping systems
• Drainage piping where compatible
• Plumbing installations
• 45° pipe direction changes
• Residential piping
• Commercial piping
• Building & renovation projects
• New piping installations
• Repair & replacement work
PVC Pipe → 45° Elbow → PVC Pipe
The fitting changes the pipe route by approximately 45 degrees, allowing a more gradual directional change compared with a 90° elbow.
40MM = 1 1/2"
50MM = 2"
80MM = 3"
100MM = 4"
150MM = 6"
200MM = 8"
PVC Elbow ‘O’
→ 薄庄 series
PVC Elbow ‘D’
→ 厚庄 series
Please select the correct series according to the PVC piping system and fitting specification required for your installation.
⚠️ Important: Do not select based on nominal size alone. Please confirm the required ‘O’ / 薄庄 type and compatibility with your PVC pipe before ordering.
⚠️ The supplied product information specifically identifies 150MM (6") and 200MM (8") as JIS. JIS should not be assumed for the 40MM, 50MM, 80MM or 100MM variations.
⚠️ Pressure rating and exact overall dimensions were not specified in the provided product information. Where a specific pressure class, standard or project specification is required, please verify compatibility before purchase.
📌 Note: Product appearance, dimensions, surface finish and markings may vary slightly depending on production batch.