


💧 Hansen Reducing Tee – Poly / PE Pipe Reducer Tee
Hansen Reducing Tee is designed to create a smaller Poly / PE pipe branch from a larger main pipeline.
The first two connections are the same size for the main Poly / PE pipeline, while the third connection is a smaller branch outlet. This allows the main pipeline to continue at its original size while creating a reduced-size branch connection.
Available in 25MM and 32MM main pipe configurations, with 20MM or 25MM reducing branch options.
✅ Hansen fitting
✅ Reducing Tee / reducer branch design
✅ Same-size connections for the main pipeline
✅ Smaller Poly / PE pipe branch outlet
✅ Creates a reduced-size branch from the main pipe
✅ Suitable for water distribution & irrigation systems
✅ Multiple main-to-branch size combinations available
🔹 25MM × 25MM × 20MM
🔹 32MM × 32MM × 20MM
🔹 32MM × 32MM × 25MM
• Poly / PE pipe systems
• Creating smaller branch pipelines
• Water distribution systems
• Irrigation systems
• Agriculture & farming
• Residential & commercial piping
• General plumbing installations
• Main-to-branch pipe connections
The first and second measurements refer to the main Poly / PE pipeline.
The third measurement refers to the smaller Poly / PE branch connection.
25MM × 25MM × 20MM
→ 25MM Main × 25MM Main × 20MM Branch
32MM × 32MM × 20MM
→ 32MM Main × 32MM Main × 20MM Branch
32MM × 32MM × 25MM
→ 32MM Main × 32MM Main × 25MM Branch
Reducing Tee
→ Main connections remain the same size
→ Branch connection is smaller
→ Example: 32MM × 32MM × 20MM
Equal Tee
→ All three connections are the same size
→ Example: 32MM × 32MM × 32MM
⚠️ Important: Please check both the main pipe size and branch pipe size before ordering. The third measurement represents the reducing branch outlet.
📌 Note: No PN pressure rating was specified in the provided product information. Product appearance and markings may vary slightly depending on production batch.
💧 Hansen Reducing Tee – Poly / PE Pipe Reducer Tee
Hansen Reducing Tee is designed to create a smaller Poly / PE pipe branch from a larger main pipeline.
The first two connections are the same size for the main Poly / PE pipeline, while the third connection is a smaller branch outlet. This allows the main pipeline to continue at its original size while creating a reduced-size branch connection.
Available in 25MM and 32MM main pipe configurations, with 20MM or 25MM reducing branch options.
✅ Hansen fitting
✅ Reducing Tee / reducer branch design
✅ Same-size connections for the main pipeline
✅ Smaller Poly / PE pipe branch outlet
✅ Creates a reduced-size branch from the main pipe
✅ Suitable for water distribution & irrigation systems
✅ Multiple main-to-branch size combinations available
🔹 25MM × 25MM × 20MM
🔹 32MM × 32MM × 20MM
🔹 32MM × 32MM × 25MM
• Poly / PE pipe systems
• Creating smaller branch pipelines
• Water distribution systems
• Irrigation systems
• Agriculture & farming
• Residential & commercial piping
• General plumbing installations
• Main-to-branch pipe connections
The first and second measurements refer to the main Poly / PE pipeline.
The third measurement refers to the smaller Poly / PE branch connection.
25MM × 25MM × 20MM
→ 25MM Main × 25MM Main × 20MM Branch
32MM × 32MM × 20MM
→ 32MM Main × 32MM Main × 20MM Branch
32MM × 32MM × 25MM
→ 32MM Main × 32MM Main × 25MM Branch
Reducing Tee
→ Main connections remain the same size
→ Branch connection is smaller
→ Example: 32MM × 32MM × 20MM
Equal Tee
→ All three connections are the same size
→ Example: 32MM × 32MM × 32MM
⚠️ Important: Please check both the main pipe size and branch pipe size before ordering. The third measurement represents the reducing branch outlet.
📌 Note: No PN pressure rating was specified in the provided product information. Product appearance and markings may vary slightly depending on production batch.