


💧 Hansen Reducing Elbow – Poly / PE Pipe Reducer Fitting
Hansen Reducing Elbow is designed to connect two different sizes of Poly / PE pipe while changing the direction of the pipeline.
Unlike an Equal Elbow where both connections are the same size, this Reducing Elbow features different pipe sizes on each end, allowing a larger Poly / PE pipe to transition to a smaller pipe size at a change of direction.
Available in 25MM × 20MM and 32MM × 25MM.
✅ Hansen fitting
✅ Reducing elbow / bend design
✅ Connects two different Poly / PE pipe sizes
✅ Changes pipe size and pipeline direction in one fitting
✅ Suitable for water supply & irrigation systems
✅ Useful where space or piping layout requires a directional size transition
🔹 25MM × 20MM
🔹 32MM × 25MM
• Poly / PE pipe systems
• Pipe size reduction
• Pipeline direction changes
• Water supply systems
• Irrigation systems
• Agriculture & farming
• Residential & commercial piping
• General water distribution systems
The first measurement refers to the larger Poly / PE pipe connection.
The second measurement refers to the smaller Poly / PE pipe connection.
25MM × 20MM
→ Connects 25MM Poly / PE Pipe to 20MM Poly / PE Pipe while changing direction
32MM × 25MM
→ Connects 32MM Poly / PE Pipe to 25MM Poly / PE Pipe while changing direction
Reducing Elbow
→ Different sizes on both ends
→ Example: 32MM × 25MM
→ Changes both pipe size + direction
Equal Elbow
→ Same size on both ends
→ Example: 32MM × 32MM
→ Changes direction only
⚠️ Important: Please check both Poly / PE pipe sizes before placing your order. This is a Reducing Elbow, so the two connection sizes are different.
📌 Note: No PN pressure rating was specified in the provided product information. Product appearance and markings may vary slightly depending on production batch.
💧 Hansen Reducing Elbow – Poly / PE Pipe Reducer Fitting
Hansen Reducing Elbow is designed to connect two different sizes of Poly / PE pipe while changing the direction of the pipeline.
Unlike an Equal Elbow where both connections are the same size, this Reducing Elbow features different pipe sizes on each end, allowing a larger Poly / PE pipe to transition to a smaller pipe size at a change of direction.
Available in 25MM × 20MM and 32MM × 25MM.
✅ Hansen fitting
✅ Reducing elbow / bend design
✅ Connects two different Poly / PE pipe sizes
✅ Changes pipe size and pipeline direction in one fitting
✅ Suitable for water supply & irrigation systems
✅ Useful where space or piping layout requires a directional size transition
🔹 25MM × 20MM
🔹 32MM × 25MM
• Poly / PE pipe systems
• Pipe size reduction
• Pipeline direction changes
• Water supply systems
• Irrigation systems
• Agriculture & farming
• Residential & commercial piping
• General water distribution systems
The first measurement refers to the larger Poly / PE pipe connection.
The second measurement refers to the smaller Poly / PE pipe connection.
25MM × 20MM
→ Connects 25MM Poly / PE Pipe to 20MM Poly / PE Pipe while changing direction
32MM × 25MM
→ Connects 32MM Poly / PE Pipe to 25MM Poly / PE Pipe while changing direction
Reducing Elbow
→ Different sizes on both ends
→ Example: 32MM × 25MM
→ Changes both pipe size + direction
Equal Elbow
→ Same size on both ends
→ Example: 32MM × 32MM
→ Changes direction only
⚠️ Important: Please check both Poly / PE pipe sizes before placing your order. This is a Reducing Elbow, so the two connection sizes are different.
📌 Note: No PN pressure rating was specified in the provided product information. Product appearance and markings may vary slightly depending on production batch.