


💧 Hansen Reducing Coupling – Poly / PE Pipe Reducer Fitting
Hansen Reducing Coupling is designed to connect two Poly / PE pipes of different sizes in a straight pipeline.
Unlike an Equal Coupling where both connections are the same size, the Reducing Coupling has different pipe sizes on each end, allowing the pipeline to transition from a larger Poly / PE pipe to a smaller pipe size.
Available in 25MM × 20MM, 32MM × 20MM and 32MM × 25MM.
✅ Hansen fitting
✅ Reducing / reducer coupling design
✅ Connects two different Poly / PE pipe sizes
✅ Straight pipeline connection
✅ Convenient transition from larger to smaller pipe size
✅ Suitable for water supply & irrigation systems
✅ Multiple reducing size combinations available
🔹 25MM × 20MM
🔹 32MM × 20MM
🔹 32MM × 25MM
• Poly / PE pipe systems
• Pipe size reduction
• Connecting different pipe sizes
• Water supply systems
• Irrigation systems
• Agriculture & farming
• Residential & commercial piping
• General water distribution systems
The first measurement refers to the larger Poly / PE pipe connection.
The second measurement refers to the smaller Poly / PE pipe connection.
25MM × 20MM
→ Connects 25MM Poly / PE Pipe to 20MM Poly / PE Pipe
32MM × 20MM
→ Connects 32MM Poly / PE Pipe to 20MM Poly / PE Pipe
32MM × 25MM
→ Connects 32MM Poly / PE Pipe to 25MM Poly / PE Pipe
Reducing Coupling
→ Different sizes on both ends
→ Example: 32MM × 25MM
→ Used to change pipe size
Equal Coupling
→ Same size on both ends
→ Example: 32MM × 32MM
→ Used to join or extend the same pipe size
⚠️ Important: Please check both Poly / PE pipe sizes before placing your order. This is a Reducing Coupling, so the two connection sizes are different.
📌 Note: No PN pressure rating was specified in the provided product information. Product appearance and markings may vary slightly depending on production batch.
💧 Hansen Reducing Coupling – Poly / PE Pipe Reducer Fitting
Hansen Reducing Coupling is designed to connect two Poly / PE pipes of different sizes in a straight pipeline.
Unlike an Equal Coupling where both connections are the same size, the Reducing Coupling has different pipe sizes on each end, allowing the pipeline to transition from a larger Poly / PE pipe to a smaller pipe size.
Available in 25MM × 20MM, 32MM × 20MM and 32MM × 25MM.
✅ Hansen fitting
✅ Reducing / reducer coupling design
✅ Connects two different Poly / PE pipe sizes
✅ Straight pipeline connection
✅ Convenient transition from larger to smaller pipe size
✅ Suitable for water supply & irrigation systems
✅ Multiple reducing size combinations available
🔹 25MM × 20MM
🔹 32MM × 20MM
🔹 32MM × 25MM
• Poly / PE pipe systems
• Pipe size reduction
• Connecting different pipe sizes
• Water supply systems
• Irrigation systems
• Agriculture & farming
• Residential & commercial piping
• General water distribution systems
The first measurement refers to the larger Poly / PE pipe connection.
The second measurement refers to the smaller Poly / PE pipe connection.
25MM × 20MM
→ Connects 25MM Poly / PE Pipe to 20MM Poly / PE Pipe
32MM × 20MM
→ Connects 32MM Poly / PE Pipe to 20MM Poly / PE Pipe
32MM × 25MM
→ Connects 32MM Poly / PE Pipe to 25MM Poly / PE Pipe
Reducing Coupling
→ Different sizes on both ends
→ Example: 32MM × 25MM
→ Used to change pipe size
Equal Coupling
→ Same size on both ends
→ Example: 32MM × 32MM
→ Used to join or extend the same pipe size
⚠️ Important: Please check both Poly / PE pipe sizes before placing your order. This is a Reducing Coupling, so the two connection sizes are different.
📌 Note: No PN pressure rating was specified in the provided product information. Product appearance and markings may vary slightly depending on production batch.