


🔩 GI Reducing Elbow – Galvanized Iron Reducer Pipe Fitting
GI Reducing Elbow is designed to connect two different pipe / fitting sizes while changing the direction of the piping system.
Unlike a standard equal-size GI Elbow, the Reducing Elbow has two different connection sizes, making it useful when a larger threaded connection needs to transition to a smaller size at a directional change.
Available in 20MM × 15MM and 25MM reducing combinations.
✅ GI / Galvanized Iron pipe fitting
✅ Reducing elbow design
✅ Connects two different fitting sizes
✅ Changes piping direction while reducing connection size
✅ Threaded connection
✅ Suitable for GI piping systems
✅ Suitable for plumbing & general piping applications
🔹 20MM × 15MM (3/4" × 1/2")
🔹 25MM × 15MM (1" × 1/2")
🔹 25MM × 20MM (1" × 3/4")
• GI pipe systems
• Reducing pipe / fitting connections
• Pipe direction changes
• Water supply piping
• Plumbing installations
• Residential piping
• Commercial piping
• Contractor & project applications
• General piping systems
The two measurements represent the different connection sizes on each side of the elbow.
For example:
20MM × 15MM (3/4" × 1/2")
→ Connects a 3/4" side to a 1/2" side while changing the piping direction.
25MM × 15MM (1" × 1/2")
→ Connects a 1" side to a 1/2" side.
25MM × 20MM (1" × 3/4")
→ Connects a 1" side to a 3/4" side.
15MM = 1/2"
20MM = 3/4"
25MM = 1"
⚠️ Important: Please check both connection sizes before placing your order. GI Reducing Elbow is different from a standard GI Equal Elbow, as the two connection sizes are not the same.
📌 Note: Product appearance, surface finish and markings may vary slightly depending on production batch.
🔩 GI Reducing Elbow – Galvanized Iron Reducer Pipe Fitting
GI Reducing Elbow is designed to connect two different pipe / fitting sizes while changing the direction of the piping system.
Unlike a standard equal-size GI Elbow, the Reducing Elbow has two different connection sizes, making it useful when a larger threaded connection needs to transition to a smaller size at a directional change.
Available in 20MM × 15MM and 25MM reducing combinations.
✅ GI / Galvanized Iron pipe fitting
✅ Reducing elbow design
✅ Connects two different fitting sizes
✅ Changes piping direction while reducing connection size
✅ Threaded connection
✅ Suitable for GI piping systems
✅ Suitable for plumbing & general piping applications
🔹 20MM × 15MM (3/4" × 1/2")
🔹 25MM × 15MM (1" × 1/2")
🔹 25MM × 20MM (1" × 3/4")
• GI pipe systems
• Reducing pipe / fitting connections
• Pipe direction changes
• Water supply piping
• Plumbing installations
• Residential piping
• Commercial piping
• Contractor & project applications
• General piping systems
The two measurements represent the different connection sizes on each side of the elbow.
For example:
20MM × 15MM (3/4" × 1/2")
→ Connects a 3/4" side to a 1/2" side while changing the piping direction.
25MM × 15MM (1" × 1/2")
→ Connects a 1" side to a 1/2" side.
25MM × 20MM (1" × 3/4")
→ Connects a 1" side to a 3/4" side.
15MM = 1/2"
20MM = 3/4"
25MM = 1"
⚠️ Important: Please check both connection sizes before placing your order. GI Reducing Elbow is different from a standard GI Equal Elbow, as the two connection sizes are not the same.
📌 Note: Product appearance, surface finish and markings may vary slightly depending on production batch.