


🔩 GI End Cap – Galvanized Iron Pipe Fitting
GI End Cap is designed to close off the end of a compatible threaded GI pipe or fitting, providing a practical way to terminate an unused or final connection in a piping system.
Available in a wide range of sizes from 15MM (1/2") up to 100MM (4"), suitable for plumbing, water supply and general GI piping installations.
✅ GI / Galvanized Iron pipe fitting
✅ Designed for closing pipe ends
✅ Threaded connection
✅ Suitable for terminating unused pipe connections
✅ Wide range of sizes available
✅ Suitable for GI piping systems
✅ Suitable for plumbing & general piping applications
🔹 15MM (1/2")
🔹 20MM (3/4")
🔹 25MM (1")
🔹 32MM (1 1/4")
🔹 40MM (1 1/2")
🔹 50MM (2")
🔹 80MM (3")
🔹 100MM (4")
• GI pipe systems
• Closing / terminating pipe ends
• Unused threaded connections
• Water supply piping
• Plumbing installations
• Residential piping
• Commercial piping
• Contractor & project applications
• General piping systems
The MM and inch measurements refer to the corresponding nominal fitting size:
15MM = 1/2"
20MM = 3/4"
25MM = 1"
32MM = 1 1/4"
40MM = 1 1/2"
50MM = 2"
80MM = 3"
100MM = 4"
For example:
15MM (1/2") GI End Cap → For a compatible 1/2" threaded connection.
50MM (2") GI End Cap → For a compatible 2" threaded connection.
100MM (4") GI End Cap → For a compatible 4" threaded connection.
⚠️ Important: Please check the required pipe / thread size carefully before placing your order to ensure the correct End Cap is selected.
📌 Note: Product appearance, surface finish and markings may vary slightly depending on production batch.
🔩 GI End Cap – Galvanized Iron Pipe Fitting
GI End Cap is designed to close off the end of a compatible threaded GI pipe or fitting, providing a practical way to terminate an unused or final connection in a piping system.
Available in a wide range of sizes from 15MM (1/2") up to 100MM (4"), suitable for plumbing, water supply and general GI piping installations.
✅ GI / Galvanized Iron pipe fitting
✅ Designed for closing pipe ends
✅ Threaded connection
✅ Suitable for terminating unused pipe connections
✅ Wide range of sizes available
✅ Suitable for GI piping systems
✅ Suitable for plumbing & general piping applications
🔹 15MM (1/2")
🔹 20MM (3/4")
🔹 25MM (1")
🔹 32MM (1 1/4")
🔹 40MM (1 1/2")
🔹 50MM (2")
🔹 80MM (3")
🔹 100MM (4")
• GI pipe systems
• Closing / terminating pipe ends
• Unused threaded connections
• Water supply piping
• Plumbing installations
• Residential piping
• Commercial piping
• Contractor & project applications
• General piping systems
The MM and inch measurements refer to the corresponding nominal fitting size:
15MM = 1/2"
20MM = 3/4"
25MM = 1"
32MM = 1 1/4"
40MM = 1 1/2"
50MM = 2"
80MM = 3"
100MM = 4"
For example:
15MM (1/2") GI End Cap → For a compatible 1/2" threaded connection.
50MM (2") GI End Cap → For a compatible 2" threaded connection.
100MM (4") GI End Cap → For a compatible 4" threaded connection.
⚠️ Important: Please check the required pipe / thread size carefully before placing your order to ensure the correct End Cap is selected.
📌 Note: Product appearance, surface finish and markings may vary slightly depending on production batch.