


💧 BUTE Reducing Tee TR-776# – Poly / PE Pipe Fitting
BUTE Reducing Tee is designed to create a smaller branch connection from a Poly / PE main pipeline.
This model features 25MM connections on both ends of the main pipeline with a 20MM reducing branch outlet, allowing the 25MM pipeline to continue while branching out to a smaller 20MM Poly / PE pipe.
Model: TR-776#
Size: 25MM × 25MM × 20MM
✅ BUTE Poly / PE pipe fitting
✅ Reducing Tee / reducer branch design
✅ 25MM main pipeline connections
✅ 20MM reducing branch connection
✅ Creates a smaller branch from the main pipeline
✅ Suitable for water distribution & irrigation systems
✅ Suitable for general Poly / PE piping applications
🔹 TR-776# — 25MM × 25MM × 20MM
• Poly / PE pipe systems
• Creating smaller branch pipelines
• Water supply systems
• Water distribution systems
• Irrigation systems
• Agriculture & farming
• Residential & commercial piping
• General plumbing installations
25MM × 25MM × 20MM
The first two measurements refer to the main pipeline connections.
The third measurement refers to the reducing branch connection.
25MM Main → Tee → 25MM Main
↓
20MM Branch
Reducing Tee
→ Main connections remain the same size
→ Branch connection is smaller
→ 25MM × 25MM × 20MM
Equal Tee
→ All three connections are the same size
→ Example: 25MM × 25MM × 25MM
⚠️ Important: This is a Reducing Tee, not a 25MM Equal Tee. The main pipeline connections are 25MM, while the branch connection is 20MM. Please check all three connection sizes before ordering.
📌 Note: No PN pressure rating was specified in the provided product information. Product appearance, surface finish and markings may vary slightly depending on production batch.
💧 BUTE Reducing Tee TR-776# – Poly / PE Pipe Fitting
BUTE Reducing Tee is designed to create a smaller branch connection from a Poly / PE main pipeline.
This model features 25MM connections on both ends of the main pipeline with a 20MM reducing branch outlet, allowing the 25MM pipeline to continue while branching out to a smaller 20MM Poly / PE pipe.
Model: TR-776#
Size: 25MM × 25MM × 20MM
✅ BUTE Poly / PE pipe fitting
✅ Reducing Tee / reducer branch design
✅ 25MM main pipeline connections
✅ 20MM reducing branch connection
✅ Creates a smaller branch from the main pipeline
✅ Suitable for water distribution & irrigation systems
✅ Suitable for general Poly / PE piping applications
🔹 TR-776# — 25MM × 25MM × 20MM
• Poly / PE pipe systems
• Creating smaller branch pipelines
• Water supply systems
• Water distribution systems
• Irrigation systems
• Agriculture & farming
• Residential & commercial piping
• General plumbing installations
25MM × 25MM × 20MM
The first two measurements refer to the main pipeline connections.
The third measurement refers to the reducing branch connection.
25MM Main → Tee → 25MM Main
↓
20MM Branch
Reducing Tee
→ Main connections remain the same size
→ Branch connection is smaller
→ 25MM × 25MM × 20MM
Equal Tee
→ All three connections are the same size
→ Example: 25MM × 25MM × 25MM
⚠️ Important: This is a Reducing Tee, not a 25MM Equal Tee. The main pipeline connections are 25MM, while the branch connection is 20MM. Please check all three connection sizes before ordering.
📌 Note: No PN pressure rating was specified in the provided product information. Product appearance, surface finish and markings may vary slightly depending on production batch.