


💧 BUTE Equal Elbow – Poly / PE Pipe Fitting
BUTE Equal Elbow is designed to connect two Poly / PE pipes of the same size while changing the direction of the pipeline.
Both pipe connections are the same nominal size, making it suitable for Poly / PE water piping installations where a directional change is required without changing the pipe size.
Available in 20MM, 25MM and 32MM.
✅ BUTE Poly / PE pipe fitting
✅ Equal-size elbow connection
✅ Connects two Poly / PE pipes of the same size
✅ Changes pipeline direction without changing pipe size
✅ Available in 20MM, 25MM & 32MM
✅ Suitable for water supply & irrigation applications
✅ Suitable for general Poly / PE piping systems
🔹 EE-66# — 20MM × 20MM
🔹 EE-77# — 25MM × 25MM
🔹 EE-99# — 32MM × 32MM
• Poly / PE pipe systems
• Pipeline direction changes
• Water supply systems
• Water distribution systems
• Irrigation systems
• Agriculture & farming
• Residential & commercial piping
• General plumbing installations
Both measurements refer to the Poly / PE pipe connection size on each end.
20MM × 20MM
→ Connects 20MM Poly / PE Pipe to 20MM Poly / PE Pipe
25MM × 25MM
→ Connects 25MM Poly / PE Pipe to 25MM Poly / PE Pipe
32MM × 32MM
→ Connects 32MM Poly / PE Pipe to 32MM Poly / PE Pipe
This is an Equal Elbow, meaning both connections are the same size.
20MM Pipe → 20MM × 20MM Elbow
25MM Pipe → 25MM × 25MM Elbow
32MM Pipe → 32MM × 32MM Elbow
⚠️ Important: Please select the fitting according to your Poly / PE pipe size. This fitting is designed for a same-size pipe connection with a change in pipeline direction.
📌 Note: No PN pressure rating was specified in the provided product information. Product appearance, surface finish and markings may vary slightly depending on production batch.
💧 BUTE Equal Elbow – Poly / PE Pipe Fitting
BUTE Equal Elbow is designed to connect two Poly / PE pipes of the same size while changing the direction of the pipeline.
Both pipe connections are the same nominal size, making it suitable for Poly / PE water piping installations where a directional change is required without changing the pipe size.
Available in 20MM, 25MM and 32MM.
✅ BUTE Poly / PE pipe fitting
✅ Equal-size elbow connection
✅ Connects two Poly / PE pipes of the same size
✅ Changes pipeline direction without changing pipe size
✅ Available in 20MM, 25MM & 32MM
✅ Suitable for water supply & irrigation applications
✅ Suitable for general Poly / PE piping systems
🔹 EE-66# — 20MM × 20MM
🔹 EE-77# — 25MM × 25MM
🔹 EE-99# — 32MM × 32MM
• Poly / PE pipe systems
• Pipeline direction changes
• Water supply systems
• Water distribution systems
• Irrigation systems
• Agriculture & farming
• Residential & commercial piping
• General plumbing installations
Both measurements refer to the Poly / PE pipe connection size on each end.
20MM × 20MM
→ Connects 20MM Poly / PE Pipe to 20MM Poly / PE Pipe
25MM × 25MM
→ Connects 25MM Poly / PE Pipe to 25MM Poly / PE Pipe
32MM × 32MM
→ Connects 32MM Poly / PE Pipe to 32MM Poly / PE Pipe
This is an Equal Elbow, meaning both connections are the same size.
20MM Pipe → 20MM × 20MM Elbow
25MM Pipe → 25MM × 25MM Elbow
32MM Pipe → 32MM × 32MM Elbow
⚠️ Important: Please select the fitting according to your Poly / PE pipe size. This fitting is designed for a same-size pipe connection with a change in pipeline direction.
📌 Note: No PN pressure rating was specified in the provided product information. Product appearance, surface finish and markings may vary slightly depending on production batch.