


🚰 110MM (4") UPVC ‘S’ Trap I/O – 白 ‘S’ 的立 I/O
UPVC S-Trap I/O is a drainage trap designed for use in compatible UPVC drainage piping systems, combining an S-shaped water trap with an Inspection Opening (I/O) for easier maintenance access.
The curved trap configuration retains a small amount of water to create a water seal, helping reduce unpleasant drain odours and sewer gases from travelling back through the drainage system.
The built-in I/O (Inspection Opening) also provides convenient access for inspection, cleaning and maintenance when required.
✅ UPVC S-Trap with I/O
✅ 110MM (4") nominal size
✅ Built-in Inspection Opening
✅ S-shaped drainage trap configuration
✅ Creates a water seal
✅ Helps reduce drain odours & sewer gas backflow
✅ White UPVC fitting
✅ Easier access for inspection & cleaning
🔹 110MM (4") – S-Trap I/O
• Compatible UPVC drainage systems
• Wastewater drainage piping
• Building drainage installations
• Residential drainage
• Commercial building drainage
• Drainage layouts requiring inspection access
• Construction & renovation projects
• Drainage maintenance & replacement work
The curved section of the S-Trap retains a small amount of water after wastewater passes through.
This retained water creates a water seal that helps form a barrier between the drainage system and the drainage opening.
Drainage Point → S-Trap 💧 → Drainage Pipe
This helps reduce unwanted odours and sewer gases from travelling backward through the drainage system.
I/O = Inspection Opening
The inspection opening provides access to the internal section of the trap for:
• Inspection
• Cleaning
• Maintenance
• Access in case of blockage
Where future maintenance is required, ensure the I/O remains accessible after installation.
UPVC S-Trap
→ S-shaped trap configuration
→ Creates a water seal
→ Used where the piping layout is compatible with an S-Trap arrangement
UPVC P-Trap
→ P-shaped trap configuration
→ Also creates a water seal
→ Uses a different outlet / piping arrangement
⚠️ S-Trap and P-Trap should not be selected interchangeably based only on pipe size. Please confirm the required drainage layout before ordering.
110MM = 4"
⚠️ Important: Please confirm that your drainage layout requires an S-Trap with I/O rather than a P-Trap or other trap configuration.
⚠️ Water-seal depth, exact outlet orientation, inspection opening design, pipe class, wall thickness and applicable UPVC standard were not specified in the supplied product information.
📌 Note: Product appearance, dimensions, inspection opening design, white colour tone, surface finish and markings may vary slightly depending on production batch.
🚰 110MM (4") UPVC ‘S’ Trap I/O – 白 ‘S’ 的立 I/O
UPVC S-Trap I/O is a drainage trap designed for use in compatible UPVC drainage piping systems, combining an S-shaped water trap with an Inspection Opening (I/O) for easier maintenance access.
The curved trap configuration retains a small amount of water to create a water seal, helping reduce unpleasant drain odours and sewer gases from travelling back through the drainage system.
The built-in I/O (Inspection Opening) also provides convenient access for inspection, cleaning and maintenance when required.
✅ UPVC S-Trap with I/O
✅ 110MM (4") nominal size
✅ Built-in Inspection Opening
✅ S-shaped drainage trap configuration
✅ Creates a water seal
✅ Helps reduce drain odours & sewer gas backflow
✅ White UPVC fitting
✅ Easier access for inspection & cleaning
🔹 110MM (4") – S-Trap I/O
• Compatible UPVC drainage systems
• Wastewater drainage piping
• Building drainage installations
• Residential drainage
• Commercial building drainage
• Drainage layouts requiring inspection access
• Construction & renovation projects
• Drainage maintenance & replacement work
The curved section of the S-Trap retains a small amount of water after wastewater passes through.
This retained water creates a water seal that helps form a barrier between the drainage system and the drainage opening.
Drainage Point → S-Trap 💧 → Drainage Pipe
This helps reduce unwanted odours and sewer gases from travelling backward through the drainage system.
I/O = Inspection Opening
The inspection opening provides access to the internal section of the trap for:
• Inspection
• Cleaning
• Maintenance
• Access in case of blockage
Where future maintenance is required, ensure the I/O remains accessible after installation.
UPVC S-Trap
→ S-shaped trap configuration
→ Creates a water seal
→ Used where the piping layout is compatible with an S-Trap arrangement
UPVC P-Trap
→ P-shaped trap configuration
→ Also creates a water seal
→ Uses a different outlet / piping arrangement
⚠️ S-Trap and P-Trap should not be selected interchangeably based only on pipe size. Please confirm the required drainage layout before ordering.
110MM = 4"
⚠️ Important: Please confirm that your drainage layout requires an S-Trap with I/O rather than a P-Trap or other trap configuration.
⚠️ Water-seal depth, exact outlet orientation, inspection opening design, pipe class, wall thickness and applicable UPVC standard were not specified in the supplied product information.
📌 Note: Product appearance, dimensions, inspection opening design, white colour tone, surface finish and markings may vary slightly depending on production batch.